Home > Magpul > Misc. Accessories > M-LOK Rail Accessories
Sort By:
1
The M-LOK T-Nut Replacement Set is a hardware set designed for use with all M-LOK accessories. Made of 4140 Chromoly Steel with a Mil-Spec Manganese Phosphate finish, the hardware set is supplied with two different length button-head socket cap screws to ensure compatibility with various hand guard or forend thicknesses. A self-locking reusable thread patch is added to the screws to ensure a secure fit upon installation.

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
The Magpul RVG M-LOK Adapter Rail is a polymer M-LOK accessory rail that is optimized for the attachment of the Magpul RVG to all M-LOK compatible hand guards and forends. Molded of the same high quality material as other Magpul Polymer Rails, the RVG M-LOK Adapter Rail has the same footprint as the RVG and lower profile than a standard Picatinny Rail to ensure a seamless transition between the different components.

All hardware necessary for attachment directly to M-LOK slots on compatible aluminum or polymer hand guards and forends in included.

2 Slots, max overall length of 1.9".

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.

Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

3 Slots, max overall length of 1.6 in.

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.

Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

5 Slots, max overall length of 2.5 in.

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
The Magpul AFG-2 M-LOK Adapter Rail is a polymer M-LOK accessory rail that is optimized for the attachment of the Magpul AFG-2 to all M-LOK compatible hand guards and forends. Molded of the same high quality material as other Magpul Polymer Rails, the AFG-2 M-LOK Adapter Rail has the same footprint as the AFG-2 and lower profile than a standard Picatinny rail to ensure a seamless transition between the different components.

All hardware necessary for attachment directly to M-LOK slots on compatible aluminum or polymer hand guards and forends in included.

3 Slots, max overall length of 4.7".

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
The Magpul M-LOK to MOE Adapter Kit is designed specifically to adapt many M-LOK compatible accessories to Legacy MOE Hand Guards and Forends. The M-LOK to MOE adapter plates are customizable to length by snapping sections off at the pre-determined locations which help ensure a near seamless installation.

Adapter plates of various sizes and all replacement hardware are included.

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.

Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

7 Slots, max overall length of 3.3 in.

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product

Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.

Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

9 Slots, max overall length of 4.1 in.

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.

Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

11 Slots, max overall length of 4.9 in.

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
M-LOK QD Sling Mount
Our Price: $19.95
Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.

Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

3 Slots, max overall length of 1.6".

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product

Designed for use with all M-LOK mounting surfaces, the M-LOK Polymer Cantilever Rail/Light Mount allows the attachment of various MIL-STD-1913 Picatinny spec rail-mounted accessories such as lights and optics, and directly interfaces with the popular Surefire M300/M600 series Scout Lights or Magpul Light Mount V-Block and Rings. The Cantilever Rail/Light Mount has Picatinny slots that extend forward .75"-1.5" past the M-LOK mounting slot to improve ergonomics and optimize accessory positioning in a wide variety of uses, while keeping lights and accessories low to reduce the weapon's profile.

Molded from heavy-duty reinforced polymer to save weight and expense, the Cantilever Rail/Light Mount also features beveled ends and corners to reduce snagging and sharp edges.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

3 MIL-STD-1913 Slots, max overall length of 3.15"

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
The M-LOK QD Sling Mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum, the low-profile M-LOK QD Sling Mount features beveled edges to reduce snagging and has an anti-rotation design that prevents swivels from spinning.

All hardware necessary for attachment directly to M-LOK Slots is included and and no modifications to the M-LOK hand guard or forend is required

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.

Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

5 Slots, max overall length of 2.5".

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.

Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

7 Slots, max overall length of 3.3".

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments. With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
M-LOK Bipod Mount
Our Price: $22.95
The Magpul M-LOK Bipod Mount allows for the attachment of Harris®-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability.
The Bipod Mount is also compatible with other accessories that attach to traditional sling studs.

Machined from milspec-anodized aluminum, the M-LOK Bipod Mount also features beveled ends and corners to reduce snagging and sharp edges.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

Max overall length of 2.33 in.

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.

Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

9 Slots, max overall length of 4.1"

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
The M-LOK Offset Light/Optic Mount, Aluminum provides the user with an ambidextrous platform to mount weapons lights or optics at both the 11 and 1 o'clock positions on M-LOK compatible hand guards and forends. Machined from milspec-anodized aluminum, this mounting solution features beveled ends and corners to reduce snagging and sharp edges. The Offset Light/Optic Mount allows for the direct attachment of the Surefire® M300/600 series of Scout Lights® or other MIL-STD-1913 Picatinny light and optic mounts.

The optional Magpul Light Mount V-BLock and Rings can also be used to attach hand held lights with a diameter from 0.75 to 1.03 in.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
Designed for use with all M-LOK mounting surfaces, the M-LOK Aluminum Cantilever Rail/Light Mount allows the attachment of various MIL-STD-1913 Picatinny spec rail-mounted accessories such as lights and optics, and directly interfaces with the popular Surefire M300/M600 series Scout Lights or Magpul Light Mount V-Block and Rings. The Cantilever Rail/Light Mount has Picatinny slots that extend forward .75"-1.5" past the M-LOK mounting slot to improve ergonomics and optimize accessory positioning in a wide variety of uses, while keeping lights and accessories low to reduce the weapon's profile.

Machined from milspec-anodized aluminum, the Cantilever Rail/Light Mount also features beveled ends and corners to reduce snagging and sharp edges.

All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

3 MIL-STD-1913 Slots, max overall length of 3.15"

Made in U.S.A.

E.A.R.
Export Administration Regulations Controlled Product
\
   
 
1