The time consuming and labor intensive chore of
cleaning your pistols, automatic and semi-automatic weapons is a thing of the
past with Carbon Killer.
Slip 2000 Carbon Killer was designed with your health
and safety in mind. Unlike other gun cleaners, this product is non-flammable,
non-hazardous and biodegradable. Carbon Killer provides you with a safe
effective way to clean carbon, lead and plastic wad fouling.
Reusable
Slip 2000 Carbon Killer keeps working even when it becomes dirty. If stored
properly one jar can be used again and again providing many cleanings.
Use It On
All weapons including revolvers, pistols, 37mm and 40mm Gas Guns, automatic and
semi-automatic weapons like M-16, AR-15, MP-5, and all Machine Guns like the
AK-47 and 249-SAW.
Flash Suppressors, Silencers and Cans
Dissolves burnt on carbon and will help flush powder and carbon residue out of
all cans and suppressors.
Compensators
Dissolves burnt on carbon and will help flush powder and carbon residue off of
your compensator.
Bore Cleaner
Carbon Killer works fantastic as a bore cleaner. Use it to remove all of the
carbon, lead and plastic that has built up in your bore. Apply with a
sacturated patch or mop, or by plugging one end of the bore and filling with
Carbon Killer. Let soak for a few minutes. Use a brush and then retreat cleaned
areas with a Slip 2000 Lubricant.
Simple to use
Soak Parts
For best results completely submerse parts in Carbon Killer and allow to soak
for 5 to 15 minutes. Remove parts and wipe, brush or rinse clean. It's that
easy. Depending on the frequency of cleaning or type of ammo used a second
soaking may be required as well as a light brushing.
Wipe Parts Clean
For larger parts that will not fit into the jar or soaking tray, saturate a rag
in Carbon Killer and apply to area that needs to be cleaned and allow product
to sit for 2 to 5 minutes. When ready to clean soak a brush or rag with Carbon
Killer and wipe or brush away carbon. Parts may also be rinsed clean under hot
water.
Relubricate
After cleaning, always re-apply a Slip 2000 Lubricant to metal surfaces and
allow to penetrate pores of metal. SLiP2000 lubricants will form a barrier and
help keep carbon, lead and plastic from sticking. Your next cleaning will take
half the time.