SLip2000™ Lubricant was designed and formulated with multiple uses and
extreme high performance requirements and conditions in mind. SLip2000™
Lubricant will outperform all other Lubricants in its class in sever weather
conditions, high humidity, rain, sleet, and snow working from -130 deg. F to +
1250 deg F
SLip2000™ Lubricant contains an exclusive metal treatment designed to
control friction, which reduces heat, which eliminates excessive wear. It
penetrates the micropores of the metal surfaces bonding itself to the metal
allowing lubrication from within the metal itself.
DOES NOT Contain any Silicone or PTFE (Teflon*) type ingredients. Never gets
sticky or tacky. Does not attract dust, dirt or grime like a petroleum product.
Its just like seasoning a frying pan, the more you use it, the less anything
will stick!
Approved by Aberdeen Proving Grounds
SLip2000™ Lubricant has passed and been approved for use in dusty
environments (Iraq) on the M16 and smaller weapons by Aberdeen Proving Grounds.
Additional testing still ongoing.
Exceeds current
MIL-SPEC-63460D
SLip2000™
Lubricant has had to go through many testing stages. One of the product guide
lines that was followed was MIL SPEC 63460D for the US government. SLip2000™
Lubricant has passed all test requirements set forth for this spec and in fact
has exceeded many requirements.
Cleans
SLip2000™ Lubricant and its unique formulation
penetrates powder residue, carbon, copper, lead and plastic wad fouling. It
will break the contaminants free and flush away trapped dirt, grit and grime. SLip2000™
Lubricant will cut through built up carbon, copper and lead. What's left behind
is a barrier that has bonded with the metal that will continue to lubricate and
protect against corrosion. This film does not attract dust and it will also
keep new firing residue from sticking again. After your first complete cleaning
with SLip2000™ Lubricant you will see an amazing difference in the time
and ease with which your next cleaning will take place.
Shotgun Users
Apply our SLip2000™ Lubricant to all moving
parts. Ejectors, chambers, actions, firing pins, bolts, hinge pins, receiver
etc. Be sure to apply a coat in the barrels also using proper techniques. After
you have used SLip2000™ Lubricant to clean and lubricate all moving
parts including the chokes in a shotgun, burned on carbon and plastic wad
fouling is removed very easily with your normal cleaning.
Automatic and Semi-automatic weapons such
as the M16 - AR15
Apply our SLip2000™ Lubricant to all moving
parts. Ejectors, chambers, actions, firing pins, bolt, magazine, receiver etc.
Be sure to apply a coat in the barrels also using proper techniques.The same
thing is true with revolver cylinders. Apply SLip2000™ Lubricant to the
face of the cylinder and a light coat in the chamber. After you have shot a few
hundred rounds, just take a little SLip2000™ Lubricant on a rag and wipe
the carbon away. It is that simple. No more digging / scraping or fighting with
special tools and expensive toxic cleaners! SLip2000™ Lubricant makes
clean up a breeze.
Lubricates
SLip2000™
Lubricant and its unique formulation penetrate into the smallest, tightest
areas that oils do not go. This allows it to replenish the lubricant that has
been lost during operation and provides a long lasting protective coating that
reduces friction to a minimum and almost stops metal to metal wear. SLip2000™
Lubricant forms a barrier that will then protect all parts and will allow them
to work smoother and last longer.
Protects
SLip2000™
Lubricant and its unique formulation provide a long lasting barrier on all
metal parts and does not attract dirt or other abrasive contaminants. Displaces
moisture and prevents rusting. Proprietary formulation was developed to Clean /
Lubricate / Protect and out last any other product on the market today! We have
done this without adding any oils, petroleum distillates or harmful PTFE type
ingredients. SLip2000™ Lubricant was developed with our health, safety
and the environment in mind.